Samsung SPD-3750T - Manual (Page 21)

SPEED DOME CAMERA User’s Manual 40 SPEED DOME CAMERA User’s Manual 41
Camera Setting
① Focus & Zoom
 White Balance ATW
③ Exposure
④ Back Light OFF
 AGC Medium
 SSNR Medium
⑦ Day & Night
⑧ Others
Main Menu
① Camera Setting
② Sequence Setting
③ P/T Setting
④ OSD Setting
⑤ Alarm Setting
⑥ Initialize
 Status
➡
➡
Exposure
 Brightness 050
 Iris AUTO
 Shutter ---
 Sens-Up AUTO
3. Exposure
▶ Main Menu/Camera Setting/Exposure
The Exposure settings are to control the camera’s exposure
meter.
Brightness : Adjusts the screen brightness.
(Over 50: Brighter, Under 50: Darker)
Iris :
- Auto : Automatically adjusts the exposure meter.
- Manual : Enables manual adjustment of the exposure
meter. (Over 50: Brighter, Under 50: Darker)
Shutter : Controls the camera’s electronic shutter.
- --- : The shutter speed is fixed at 1/60 for NTSC and 1/50
for PAL. Operates when Iris is on the Auto Mode.
- ESC : Adjusts the shutter speed automatically according
to the screen brightness. Operates when Iris is on
the Manual Mode.
- A.FLK : Select this setting when you experience picture
flickering. Flickering can happen when artificial
lighting frequencies clash with camera frame rates.
- Manual : Enables manual adjustment of the shutter speed.
Sens-Up :
- Auto : Automatically detects light levels and maintains a
clear picture at night or under low-light conditions.
- Sens-Up Limit : Adjusts to the maximum-powered zoom
per frame.
•ForoptimalperformanceoftheA.FLKmode,avoid
using the mode in conjunction with Backlight.
•WhiletheInternalSyncmodeisineffect,settingthe
shutter to '---' and facing the camera directly to a
bright light source may cause poor camera
performance.
•Sens-UpisdisabledwhentheshutterisinManualor
A.FLKmode.
Notes
Camera Setting
① Focus & Zoom
 White Balance ATW
③ Exposure
④ Back Light OFF
 AGC Medium
 SSNR Medium
⑦ Day & Night
⑧ Others
Main Menu
① Camera Setting
② Sequence Setting
③ P/T Setting
④ OSD Setting
⑤ Alarm Setting
⑥ Initialize
 Status
➡
4. Backlight
4.1 Backlight Mode Settings
▶ Main Menu/Camera Setting/Back Light
Unlike other cameras, Samsung Techwin’s unique SV-IV DSP
chip gives you a clear image of the subject even with bright
backlight.
Back Light Mode :
- Off : Disables the Backlight mode.
- WDR : Activates the Wide Dynamic Range mode.
- HLC : Activates the High Light Compensation mode.
- User : Activates a user defined backlight compensation
mode.
Functional Description Functional Description