Samsung SPD-3750T - Manual (Page 30)

SPEED DOME CAMERA User’s Manual 58 SPEED DOME CAMERA User’s Manual 59
Auto Run
 Mode OFF
 Time 30 SEC
Sequence Setting
① Preset
② Swing SEQ
③ Group SEQ
④ Tour SEQ
⑤ PTZ Trace
⑥ Auto Run
 Power On Resume ON
 MD Dwell Time OFF
Main Menu
① Camera Setting
② Sequence Setting
③ P/T Setting
④ OSD Setting
⑤ Alarm Setting
⑥ Initialize
 Status
➡
➡
15. Auto Run
▶ Main Menu/Sequence Setting/Auto Run
If there is no controller operation by the user for a certain time,
the sequence operation designated by the user will be
executed.
Mode :
- Home : Auto run Home Position (Refet to the Preset
Menu.)
- Preset : Auto run a selected preset number.
- Swing : Auto run a selected Swing mode.
- Group : Auto run a selected Group mode.
- Tour : Auto run a selected Tour mode.
- Trace : Auto run a selected trace mode.
- A.Pan : Auto run a 360-degree pan. To activate the
panning command, you need to set up the
camera's tilt angle and auto pan speed manually.
Time :
Enables setting up an Auto Run duration. (The duration can
be 1~60 seconds, or 1~60 minutes.)
Start Limit
Enter: Set ESC: Exit
End Limit
Enter: Set ESC: Exit
Pan/Tilt Limit
① Pan Limit
② Tilt Limit
Pan/Tilt Limit
① Position
② ON/OFF OFF
P/T Setting
① Pan/Tilt Limit
② Area Setting
③ Area Masking
 Prop. P/T ON
 Digital Flip ON
 Image Hold OFF
⑦ Auto Track1
⑧ Auto Track2
Main Menu
① Camera Setting
② Sequence Setting
③ P/T Setting
④ OSD Setting
⑤ Alarm Setting
⑥ Initialize
 Status
➡
➡
➡
Start Limit
Enter: Set ESC: Exit
End Limit
Enter: Set ESC: Exit
⇨
⇨
16. Pan/Tilt Limit
▶ Main Menu/P/T Setting/Pan/Tilt Limit
The moving ranges in the Pan/Tilt directions can be limited.
Position :
Selecting the Position menu brings up the following screen
if it is for the Pan Limit setting. Move the joystick left and
right to select a movement range from the starting point to
the end.
On/Off :
Cancels or activates the Pan/Tilt Limit functions.
The following picture shows the Tilt Limit setting.
Move the joystick left and right to select a movement
range from the starting point to the end.
P/T Setting
Functional Description Functional Description