Samsung SPD-3750T - Manual (Page 26)

SPEED DOME CAMERA User’s Manual 50 SPEED DOME CAMERA User’s Manual 51
Sequence Setting
① Preset
② Swing SEQ
③ Group SEQ
④ Tour SEQ
⑤ PTZ Trace
⑥ Auto Run
 Power On Resume ON
 MD Dwell Time OFF
Main Menu
① Camera Setting
② Sequence Setting
③ P/T Setting
④ OSD Setting
⑤ Alarm Setting
⑥ Initialize
 Status
➡
Preset
 Setting
 Edit
 Execute
 Clear
 Status
➡
Preset Setting
Preset = 001 (255)
10. Preset
10.1 Preset Location Saving
▶ Main Menu/Sequence Setting/Preset/Setting
This function enables the memorization of a selected location
and activates the Pan, Tilt, and Zoom functions at that location.
Saved locations can be recalled using the Preset Execute
command.
Setting Up Preset Numbers :
Selecting the Preset Setting menu brings up a screen as
shown below. Move the joystick in all four directions to
select the desired number.
Saving Preset Locations :
Selecting a preset number and pressing the Enter key
redirects the menu to the screen shown below.
Using the joystick, adjust the location of the Pan and Tilt
functions and then set the Zoom and Focus command.
In Preset Settings, the Zoom and Focus command is
controllable only by the Zoom command. To switch
between Zoom and Focus, use the Preset 1 and 2
commands as shown below.
You can edit the 13 preset items such as Pan/Tilt location,
Zoom and Focus, which are selected among camera functions.
PTZ :
Recalls saved locations using the Preset Settings command.
Focus Mode :
Refer to the section entitled Setting Up Your Camera.
Brightness :
Refer to the section entitled Setting Up Your Camera.
Iris :
Refer to the section entitled Setting Up Your Camera.
Backlight :
Refer to the section entitled Setting Up Your Camera.
Day & Night :
Refer to the section entitled Setting Up Your Camera.
After Act :
Enables setting up an automatic action after the camera
arrives at a selected preset location.
- TRACK : Commands the camera to perform the Auto
Tracking function.
- MD : Commands the camera to perform the Motion
Detection function.
- None : Select this when no action is desired.
Scene Adj :
Enables setting the Shutter, AGC, SSNR, Sens-Up, White
Balance, and Stabilizer functions. For more information
about interface terminology, please refer to the section
entitled Setting Up Your Camera.
10.2 Preset Edit
▶ Main Menu/Sequence Setting/Preset/Edit
Functional Description Functional Description
Preset Setting Z>Z00M
1+PST:ZOOM 2+PST:FOCUS
Use W/T Preset
Sequence Setting
① Preset
② Swing SEQ
③ Group SEQ
....
Main Menu
① Camera Setting
② Sequence Setting
....
➡
Preset
 Setting
 Edit
③ Home Position OFF
 Execute
 Clear
 Status
➡
➡
Preset Edit
Preset = 001* (1~255)
Preset Edit [001]
 PTZ 271/045/1X
 Focus Mode ONE SHOT AF
 Brightness 050
 Iris AUTO
⑤ Back Light
 Day & Night B/W
 After Act. OFF
⑧ Scene Adj.
➡