Samsung SMO-XAAV User Manual
Page 38
Eng-38
2) Move to ‘DHCP...’ by using
▲/▼ KEY at NETWORK ACCESS, then press ENTER
SWITCH to set to DHCP.
3) DNS ¥ / and DNS 2 will be automatically set to DNS as shown above.
Use KEY to change it.
4) After setting, move to the main screen by using the MENU button.
5) Set values will be stored as shown below. It takes 2 or 4 seconds.
On completion of setting to DHCP setup, the screen, [D] is displayed.
If the network connection is cancelled or cut, [D] starts blinking.
6) You can view the video source of the SMO-151QN from a remote location PC.
7) Make sure the remote PC meets the minimum specification requirements described in
Chapter 5. Each product feature (Eng-91) and make sure that the PC is internet capable
and set up to be able to browse the internet.
06/01/03
13:14:00
DHCP ACCESS
DNS 1
168.126.63.001
DNS 2
168.126.63.002
06/01/03
13:14:00
NETWORK SETTING
[D]
13:14:00
CAM1