Silex technology Embedded Intelligent Module SX-560 - Manual (Page 56)

Page 50 Silex Advanced Configuration
Part Number 140-00192-100
Figure 15 SNMP Configuration
2. Click the Submit button to save the changes. You must then restart the SX-560 to make the
changes take effect.
Configuring the General Purpose I/O (GPIO) Lines
The SX-560 module has eight General Purpose I/O (GPIO) lines available for use on connector J7.
These GPIO lines are individually programmable for input, output, or special purpose. By default, six of
the GPIO lines are configured for special purpose use.
Lines configured for input can be used as a source for SNMP traps and/or email alerts. The GPIO
direction, trigger settings, and email/web page message strings are configured from the Internal
Configuration Console interface.
Table 21 through 27 describe the GPIO Commands.