Silex technology Embedded Intelligent Module SX-560 - Manual (Page 83)

Console Commands Silex Page 77
Part Number 140-00192-100
Command Description
SET NW INAP Sets EAP inner-authentication protocol
The possible protocols are PAP and MSCHAP_V2; the default value is PAP.
Format:
SET NW INAP [PAP|MSCHAP_V2]
SH NW INAP Shows the inner authentication mode
The deprecated command SH NW TTAP also returns this data.
Sample output:
Authentication protocol = PAP
SET NW REALM Sets the realm portion of the 802.1x EAP authentication ID
This value can also be set with the ID command.
The default value is null.
Format:
SET NW REALM <realm>
SH NW REALM Shows the realm associated with the authentication ID, if applicable.
The default value is null (blank) string.
The deprecated command SH NW TTRE also returns this data.
Sample output:
Somewhere
SET NW
WPAGROUP Enable or disable WPA group key mode.
If enabled, group keys can be used for data link encryption.
The default value is disabled.
Sample output:
SET NW WPAGROUP [ENABLE | DISABLE]
SH NW
WPAAUTO
Shows state of WPA auto connect flag
Sample output:
WPA-AUTO Enabled
SH NW
WPAGROUP Shows state of the allow WPA group keys flag
Sample output:
WPA-GROUP Disabled.