Inserting batteries into the remote control, Using an ipod/iphone – Sony NAC-SV10I User Manual

Page 15

Advertising
background image

15

GB

G

e

ttin
g

st
art
e

d

1

Connect the unit to an amplifier.

Use an audio connecting cord to connect the
unit to an amplifier. Make sure to match the
color-coded pins to the appropriate jacks: the
white plug to the white (L) jack and the red
plug to the red (R) jack.
Make sure to turn off the power of the
amplifier before making a connection and
connect all plugs securely to prevent noise.

2

Connect one end of the AC power
adaptor to the DC IN 6 V jack of
the unit and the other end to a wall
outlet.

WARNING

DO NOT plug the AC power adaptor into a wall
outlet until all other connections have been made.

Inserting batteries into
the remote control

Remove the battery compartment lid, and then
insert the supplied R6 (size AA) batteries (E end
first) matching the polarities as shown below.
When the remote control is no longer able to
operate the unit, replace both batteries with new
ones.

Using an iPod/iPhone

Insert a Dock Adapter into the iPod/iPhone dock.
When using an iPod model, use the dock adapter
supplied with your iPod.
When using an iPhone model, use one of the Dock
Adapters for iPhone models supplied with this
unit.

To remove the Dock Adapter for an iPhone model,
pull it up with your fingernail or a flat object using
the slot inside the adapter.

To the AUDIO OUT
L/R jacks

To the audio input
jacks of an amplifier

Audio connecting cord

To the DC IN
6 V jack

To a wall
outlet

A Dock Adapter
for an iPhone
model

iPod/iPhone dock

Advertising