Sony NAC-SV10I - Manual (Page 63)

63 GB
Tr
oub
le
sh
oot
in
g
iPod & iPhone function and set “Remote UI Mode”
to “On” (page 33).
, Make sure the iPod/iPhone is connected securely.
, You can use the unit as a battery charger for an iPod/
iPhone when the unit is on or when “Network
Standby” set to “On” (page 34).
, This may sometimes happen, depending on the iPod/
iPhone model you are using.
, This may sometimes happen, depending on the iPod/
iPhone model you are using.
, Depending on the security software used on the
computer, the computer may not appear in the server
list of the unit. For details, refer to the help of the
security software.
, You may have turned this unit on before you turned
the server on. Enter the options menu and select
“Refresh” in the server list display to refresh the
server list (page 40).
, Make sure that the router/wireless LAN router/access
point is turned on.
, Make sure that the server is turned on.
, Confirm that the server has been set correctly
(page 35). Confirm that the unit has been registered
with the server and is set to allow music streaming
from the server.
, Confirm that the unit and the server are connected to
the router/wireless LAN router/access point
correctly. Enter the settings menu and select
“Network Settings” - “Tools” - “Connection
Diagnosis” (page 31). For further information on the
network connection, refer to the customer support
site (page 61).
, The server may be unstable. Restart it.
, If the ICF (Internet Connection Firewall) function is
active on the computer, this may prevent the unit
from connecting to the computer (only when your
computer is used as a server). You may need to
change the firewall settings to allow the unit to
connect. (For details on changing the firewall
settings, refer to the operating manual of your
computer).
, Shuffle repeat play is selected. Set the play mode to
normal (page 45).
, The bandwidth of your wireless LAN may be too
low. Move the unit and the wireless LAN router/
access point closer to each other, without any
obstacles between them.
, When you are using your computer as a server, the
computer may be running many applications. If anti-
virus software is active on the computer, temporarily
disable that software as it needs large amounts of
system resources.
, Depending on the network environment or any radio
interference, it may not be possible to play tracks
with more than one device operating at one time.
Turn off any other devices to enable the unit to play
tracks.
, You cannot play any files other than audio files.
, Confirm that the server has been set correctly
(page 35). Confirm that the unit has been registered
with the server and is set to allow music streaming
from the server.
, Check to confirm whether the audio file on the server
is damaged or erased. Refer to the operating manual
of the server.
, You cannot play the following tracks:
• A track that violates playback restrictions.
• A track with irregular copyright information.
• A track that you purchased at an online music store
that does not allow home network streaming.
• A track in a format not supported by the unit
(page 38).
, Confirm that the selected track has not been erased
from the server. If the track has been erased, select
another track.
, Make sure that the router/wireless LAN router/access
point is turned on.
, Make sure that the server is turned on.
, The server may be unstable. Restart it.
, Confirm that the unit and the server are connected to
the router/wireless LAN router/access point
correctly.
, If there are no tracks or folders in the selected folder,
you cannot extend the folder to display its contents.
The iPod/iPhone cannot be charged.
“Remote UI Mode” is automatically set to “On”
when an iPod/iPhone is connected to the
iPod/iPhone dock of the unit.
“Remote UI Mode” cannot be set to “Off.”
Home Network
The server (such as a computer) does not
appear in the server list. (“No Server”
appears.)
You cannot play audio data normally.
The sound skips during playback.
“Cannot Play” appears.
“No Content” appears.