Sharp AQUOS BD-HP24U(A) - Manual (Page 22)

Before Starting Playback
Turning the Power On
Turning the power on
Press POWER on the remote control or on the Player
to turn on the power of the Player.
NOTE
When you turn on this player for the first time after
purchase or when you turn on this player after you perform
“System Reset” (see page 41), the language setting screen
will be displayed, so please perform the language setting
(see step 4 of page 21). •
Entering standby
Press POWER on the remote control or on the Player
to enter standby.
If you press POWER again immediately after entering
standby, the Player may not turn on. If this happens, wait
for 10 seconds or more and then turn on the power again.
NOTE
When the ON/STANDBY indicator is blinking (may take
some time), the Player cannot be turned on. •
Indicators on the Player
ON/STANDBY indicator
Green on Power on
Red blinks Preparing for standby
Red on Standby
AQUOS PURE MODE indicator
Green on Output in AQUOS PURE
MODE (See page 22.)
BD/DVD/CD mode indicator
Blue on Playing back
Blue blinks Loading a disc
•
20
POWER
BD/DVD/CD mode indicator
AQUOS PURE MODE indicator
ON/STANDBY indicator
BD-HP24UA_en.indd 20 BD-HP24UA_en.indd 20 2010/06/10 17:58:36 2010/06/10 17:58:36