Communication setup, Settings – Sharp AQUOS BD-HP24U(A) User Manual

Page 44

Advertising
background image

SETTINGS

Communication Setup

This allows you to perform and/or change the
communication setting. This setting is required to use
BD-LIVE functions, Netflix and software updates that
connect to the internet.

NOTE

Make sure that the LAN cable is connected to this Player.
(See page 18.)
For manually performing the setting, the following
information of the connected router or modem is required.
Confirm the information prior to the setting.

IP address, netmask, gateway, DNS address

This player cannot be connected to a network when a
proxy server is used.

Press

SETUP to display the Menu screen.

Press

a/b to select “Settings”, then press d or

ENTER.

Press

a/b to select “Communication Setup”,

then press

d or ENTER.

Press

ENTER, then press

a/b to select

“Change”, and then press

ENTER again.

Current Ethernet setup info.

: Auto Setup
: Auto Setup
: Auto Setup
: Auto Setup

IP Address
Netmask
Gateway
DNS

Change

Initialize

For initializing the current setting, select “Initialize”,
then press ENTER.

1
2

3

4

For setting the IP address, press

c/d to select

“Yes” or “No”, then press

ENTER.

Do you obtain the IP address
automatically?

IP Address

Netmask

Gateway

Next

Yes

No

If selecting “Yes”: The IP address is automatically
obtained.
If selecting “No”: The IP address, netmask and
gateway are manually entered using the screen for
inputting characters. (See page 43.)
Regarding each of the setup values, confirm the
specifications of your broadband router.

Select “Next”, then press

ENTER.

If selecting “Yes” in the step 5, go to the step 9.

Enter your DNS address.

Enter your DNS address.

Primary

Secondary

Next

The primary and secondary DNS addresses are
entered using the screen for inputting characters. (See
page 43.)
Regarding each of the setup values, confirm the
specifications of your broadband router.

Select “Next”, then press

ENTER.

For testing the connection to the internet, after
confirming the settings, press

a/b to select

“Test”, then press

ENTER.

“Test” is available only when setting to obtain the IP
address automatically. “Test” cannot be selected if the
IP address has not been obtained automatically.

Confirm the current setting.

: xxx xxx xxx xxx
: xxx xxx xxx xxx
: xxx xxx xxx xxx
: xxx xxx xxx xxx
: xx:xx:xx:xx:xx:xx

IP Address
Netmask
Gateway
DNS Address
MAC Address

Test

Complete

As a result of the test, if the internet connection fails,
enter the setup values manually.

Press

a/b to select “Complete”, then press

ENTER.

5

6

7

8
9

10

42

BD-HP24UA_en.indd 42

BD-HP24UA_en.indd 42

2010/06/10 17:59:08

2010/06/10 17:59:08

Advertising