Sharp MD-M3H User Manual

Page 33

Advertising
background image

31

3

2

3

4

4

H

H

5

5

Recording from the built-in radio

onto a MiniDisc

1

Tune in to the desired station. (pages 16 - 17.)

2

Load a recordable MiniDisc.

3

Press the

REC button.

The unit will enter the recording stand-by mode.

4

Check the recordable time by pressing the DIS-
PLAY button.

Note:

Before recording an AM broadcast, enter the
recording stand-by mode, and then separate the
AM loop aerial from the main unit. Adjust it so
that the AM broadcast can be tuned in most
clearly.

During recording, you cannot change the station.

5

Press the

0 6

button.

To stop recording:

Press the

button.

After the track number has been written on the
MiniDisc, the recording will stop.

To record the track number whilst record-
ing:

The recording is performed as a single track.
To identify different sections of a recording you can
increase the track number at any point during the
recording process.
To create a new track number, whilst in the record-
ing mode, press the

REC button.

The track number will increase by one, and then
the recording will continue.

(Continued)

Advertising