Using external units, Connecting external units, Headphones – Sharp MD-M3H User Manual

Page 44

Advertising
background image

42

Connecting external units

Before connecting external units, set this unit to the stand-by mode and turn off the power to the external
units.
Connecting to stereos or MD/CD players (equipment which can output analogue signals)

The other MD/CD player

Commercially available lead
with 3.5 mm (1/8") stereo
mini-plug and RCA plugs

T o t h e o u t p u t /
headphone socket

RIGHT

LEFT

To the analogue
output sockets

LEFT

RIGHT

RIGHT

LEFT

Red plug

To RIGHT

White plug

To LEFT

Commercially available RCA lead

AUX

INPUT

LEVEL

RIGHT

LEFT

AUX

INPUT

LEVEL

RIGHT

LEFT

Note:

When the audio output signal of an external unit is connected to this unit, oscillation may occur.
In such a case, disconnect either the input or output connection.

Headphones

Notes:

Before plugging in or unplugging the headphones, make sure the volume level is reduced.

Be sure your headphones have a 3.5mm (1/8˝) diameter plug and are between 16 ohms and 50
ohms /impedance. The recommended impedance is 32 ohms.

When headphones are connected, the speakers are disabled automatically.
Adjust the VOLUME control for the desired volume.

USING EXTERNAL UNITS

Advertising