SMC Networks SMC Barricade Plus SMCBR18VPN - Manual (Page 41)

7.10 | Advanced Setup - SNMP
The Simple Network Management Protocol (SNMP) lets you manage a computer network
remotely by polling and setting terminal values and monitoring network events.
• Enable SNMP: You can check Local, Remote, or both options to enable the SNMP
function.
o If Local is checked, the router responds only to requests from the LAN.
o If Remote is checked, the router responds only to requests from the WAN.
• Get Community: Setting this option allows the router respond to a request.
• Set Community: Setting this option allows your router to accept a request.
7.11 | Advanced Setup - ROUTING
The Routing Table lets you determine which physical interface address to use for outgoing IP
data grams. If you have more than one router and subnet, you will have to enable the routing
table to allow packets to find the routing path. This allows different subnets to communicate with