SMC Networks SMC Barricade Plus SMCBR18VPN - Manual (Page 43)

If the host wants to send an IP data gram to 192.168.3.88, it uses the above table to determine
that it has to go via the 192.168.1.33 gateway. If the host wants to send packets to
192.168.5.77, it has to go via the 192.168.1.55 gateway. For an overview, see the chart below:
7.12 | Advanced Setup - MISCELLANEOUS
If you experience difficulties accessing an FTP server that is running on a port other than 21, you
can enter that port in the “Non-standard FTP port” and apply the changes.
Wake-on-LAN is a technology that lets you power up a networked router remotely. To use this
feature, the target network adapter must be Wake-on-LAN enabled and you have to know the
MAC address of the adapter. The address should look similar to this: 00-11-22-33-44-55.
Depressing the “Wake up” button tells the router to send the wake-up frame to the target
adapter.
The ping diagnostics feature allows you to configure an IP address to ping from the router. You
can ping a specific IP or domain to test whether the router is active.
7.13 | Advanced Setup – DISPLAY STATUS
Enable the Display Status option to view the WAN connectivity settings on the login page.