Siemens SL4 - Manual (Page 14)

6HWWLQJ XS WKH ,QWHUQHW &RQQHFWLRQ
#
The subsequent startup depends on the option selected in the dialog box
Select Connection. For further information, see the relevant chapter.
&RQQHFWLQJ 6,0SDG WR ,*DWH
3UHUHTXLVLWHV
The I-Gate PC Card has to be plugged into the SIMpad, with the green
LED on the PC Card lit.
&RQQHFWLRQ
The following dialog window appears.
Tap OK. You are then asked if you wish to save the data. Confirm the query
with OK. The data is permanently saved. A confirmation message informs
you that the data has been saved. Tap OK.
There are now two options for accessing the Internet using I-Gate.
&RQQHFWLRQ WR ,6'1 3ULYDWH &RQQHFWLRQ
The prerequisite is that the AccessPoint is set to the factory default and is
already in operation (connected to ISDN). Otherwise, the Internet provider
account must be configured in the AccessPoint.
6HOHFWHG &RQQHFWLRQ 6HH
I-Gate 802.11B
Chapter "Connecting SIMpad to I-Gate", page 14
HomeRF Chapter "Connecting SIMpad to HomeRF Gate-
way", page 16
PC Card Chapter "Using a PC Card to Access the Inter-
net", page 18
Infrared or serial Chapter "Connecting SIMpad via Infrared or Se-
rial Interface", page 21
9vhy‚tГi‚‘Г Network Settings
If you are using SIMpad for the first time, Internet Explorer (see
page page 49) now starts automatically. If this is a subsequent
configuration, you must now open Internet Explorer by tapping
In-
ternet in the 6WDUW &HQWHU.