Siemens SL4 - Manual (Page 29)

&RQQHFWLQJ WR \RXU GHVNWRS 3&
!(
7URXEOHVKRRWLQJ SDUWQHUVKLSV
SIMpad is designed to automatically detect the connection type and con-
figure itself to communicate with your desktop PC. However, if you are
unable to establish a connection between your SIMpad and your desktop
PC, please follow the following steps.
1. Verify that the serial PC connection cable is connected to your
SIMpad.
2. Check with Start “ Programs “ Communication “ ActiveSync if in
the drop down list you have selected the right connection method.
3. If you continue to have difficulty synchronizing, in the Connection Set-
tings dialog of Microsoft ActiveSync window on your desktop PC (see
below), clear the Allow check box for the type of connection you are
using, and then click OK. Disconnect the serial PC connection cable
and connect it again.
4. After the connection is disabled, re-select the appropriate Allow check
box and click OK to enable the connection again.
If these steps fail to correct the problem use the ActiveSync Help program
or refer to the FAQs on the SIMpad portal
KWWS ZZZP\VLHPHQVFRPVLPSDG
9vhy‚tГi‚‘Г Connection Settings