Siemens SL4 - Manual (Page 86)

6XEVHTXHQW +RPH5) &RQILJXUDWLRQ
'%
&RQQHFWLQJ 6,0SDG WR +RPH5) *DWHZD\
If you have not yet configured a password for the cordless HomeRF Gate-
way, the following dialog box appears.
Enter the password for the cordless network. This is the password you set
when you connected the first component to the HomeRF Gateway.
Then tap
OK.
If you do not know the password or have entered it incorrectly, see Chap-
ter "Reading out the Network Password" on page 87.
If you have entered the password correctly, the SIMpad is now connected
to the cordless network. Now proceed with the HomeRF Gateway config-
uration. How you do this is explained in Chapter "Configuring HomeRF
Gateway" on page 87.
9vhy‚tГi‚‘Г Check Network Connection