Schneider Electric 890USE17700 - Manual (Page 45)

890USE17700 April 2004 45
3
Configuring the Island Bus
At a Glance
Introduction The information in this chapter describes the auto-addressing and auto-
configuration processes. An Advantys STB system has an auto-configuration
capability in which the current, actual assembly of I/O modules on the island bus is
read every time that the island bus is either powered up or reset. This configuration
data is saved to Flash memory automatically.
The removable memory card is discussed in this chapter. The card is an
Advantys STB option for storing configuration data offline. Factory default settings
can be restored to the island bus I/O modules and the CFG port by engaging the
RST button.
The NIM is the physical and logical location of all island bus configuration data and
functionality.
What's in this
Chapter? This chapter contains the following topics:
Topic Page
Auto-Addressing 46
Auto-Configuration 49
Installing the STB XMP 4440 Optional Removable Memory Card 50
Using the STB XMP 4440 Optional Removable Memory Card to Configure the
Island Bus 53
The RST Button 55
RST Functionality 56