Schneider Electric 890USE17700 - Manual (Page 67)

STB NIP 2212 Web Server
890USE17700 April 2004 67
About the Embedded Web Server
Introduction The STB NIP 2212 includes a Hypertext Transfer Protocol (HTTP) based
embedded web server. Via a web browser (See Browser Requirements, p. 67),
configuration and diagnostic data about the island node can be viewed and
selectively edited.
Initialization of
the HTTP Server At the end of the IP parameterization process (See Determining the IP Address,
p. 63), the STB NIP 2212 is initialized as an HTTP server, and its web pages are
available to view and/or edit.
Browser
Requirements Either the Netscape Navigator browser, version 4.0 or greater, or the Internet
Explorer browser, version 4.0 or greater, must be used with the STB NIP 2212 web
pages.
Security The STB NIP 2212 web site has three layers of security:
z The initial security is provided by the default HTTP password. You should replace
this password with your own web access password (See Web Access Password
Protection, p. 86).
z Knowledge of your web access password allows read-only access to your
STB NIP 2212 web site.
z Knowledge of the configuration password (See Configuration Password
Protection, p. 89) allows read/write access to your STB NIP 2212 web site.
Web Page Help Page-level help is available for every STB NIP 2212 web page. To display the help
text for a page, click on the word Help. It is located at the top of the web page and
to the right of the STB NIP 2212 banner.