Connecting to a power source – Samsung WB500 User Manual
Page 15
014
Connecting to a power source
How to charge the rechargeable battery
z
Before inserting any cables or AC adapter, check the directions
and do not insert using force. It may cause breakage of cable
or camera.
z
If the charging LED of the AC Charger does not turn on or blink
after inserting the rechargeable battery, please check whether
the battery is inserted correctly.
z
If you charge the battery with the camera power on, the battery
can’t charge fully. Turn the camera off while charging the
battery.
Charging LED of the AC Adapter
Charging LED
Being Charged
Red LED is on
Charging is complete
Green LED is on
Charging error
Red LED is off or blinking
Being discharged
(Using the AC adapter)
Orange coloured LED is on
– If you insert the fully discharged battery to charge it, do not turn on the
camera at the same time. This is because of the low battery capacity.
Charge the battery for more than 10 minutes before using the camera.
– Do not use the À ash frequently or take a movie clip with the fully
discharged battery charged for a short time. Even if the charger is inserted,
the camera power may be turned off because the rechargeable battery is
discharged again.