Sony DAV-LF1H - Manual (Page 34)

34 GB
Installing the IR receiver on a
wall
1
Install a commercially available screw in the
wall so that it protrudes 4 mm.
2
Detach the IR receiver stand and hang it via
hole on the rear side of the IR receiver on
the screw.
Make sure that the IR receiver does not move
after installation.
Tip
• When reattaching the IR receiver stand to the IR
receiver, attach the stand so that both delta marks on
the IR receiver and stand are aligned (page 32).
4 mm
5 – 7 mm
IR receiver
IR receiver stand