Sony DAV-LF1H - Manual (Page 89)

A
d
v
a
n
ced
Settin
g
s a
nd A
d
justm
e
nt
s
89 GB
1
Connect the calibration mic to the
ECM-AC1 jack on the rear of the
subwoofer, and set it up at the ear level
using a tripod, etc. (not supplied).
The front of each speaker should face the
calibration mic, and there should be no
obstruction between the speakers and the
calibration mic.
Note
• Place the calibration mic so that the “FRONT”
side of it is pointed toward the front speakers.
2
Press FUNCTION +/– repeatedly until
“DVD” appears in the front panel
display.
3
Press DISPLAY when the system is
in stop mode.
The Control Menu appears.
4
Press X / x to select [AUTO
CALIBRATION].
5
Press .
The [AUTO CALIBRATION] display
appears.
6
Press X / x to select [YES], then press
to start [AUTO CALIBRATION].
Be quiet during the measurement.
Note
• Avoid being in the measurement area and
making noise during the measurement (about 1
minute), to avoid measurement failure. During
the measurement, test signals are output from
the speakers.
• Reflections from walls or the floor may affect
measurements.
• When you install the surround speaker (L) to the
right position, the system set the “SL SR
REVERSE” setting (page 100) to “ON”
automatically.
VIDEO 1 VIDEO 2
VIDEO 2
TV VIDEO 1
AUDIO IN AUDIO IN DIGITAL IN
OPTOCAL
L
R
DIGITAL IN
DIGITAL
IN
COAXIAL
COAXIAL
ECM-AC1
Calibration mic
Rear of the subwoofer
START
T 0 : 0 3 : 0 4
3 ( 2 8 )
1 ( 4 4 )
DVD VIDEO
AUTO CALIBRATION
Connect calibration mic. Start
measurement?
YES
AUTO CALIBRATION
NO
Measuring. Please wait a moment.
continued