Sony CFD-CD777S MK2 - Manual (Page 20)

20 GB
2
Connecting the AC power cord
Insert one end of the supplied AC
power cord to the AC IN socket located
at the rear of the player, and the other
end to the wall outlet.
Adjusting the voltage
Be sure to set the VOLTAGE SELECTOR
(at the rear) to your local power supply.
Tip
Only for the customers supplied with
an AC plug adaptor:
Use the supplied AC plug adaptor if the plug
of the AC power cord does not match your
outlet.
3
Inserting batteries into the remote
Insert two R6 (size AA) batteries (not
supplied).
Replacing batteries
With normal use, the batteries should last for
about six months. When the remote no
longer operates the player, replace all the
batteries with new ones.
4
Using the player on batteries
Insert eight R20 (size D) batteries (not
supplied) into the battery compartment.
To use the player on batteries,
disconnect the AC power cord from the
player.
Replacing batteries
Replace the batteries when the OPR/BATT
indicator dims or when the player stops
operating. Replace all the batteries with new
ones.
Notes
• Before you replace the batteries, be sure to take
out the CD from the player.
• When you use the DC IN 12V jack, do not
connect a power cord to the cigarette lighter
socket.