Siemens syngo CT 2005C - Manual (Page 41)

Workflow Information
41
• Change one (or more) parameters for all Customer
protocols:
Select “Edit – Find/Replace”. Open the “Column“ list
box and choose the desired parameter. Select a new
function of this parameter in the “Function“ list box.
Under the button next to the Function entry you can
choose special selections, e.g., you can in-/decrease
all mAs values by a certain percentage, e.g., 5%.
Select “Replace All”.
C2-025.630.01.01.02_APPLICATIONGUIDE_SPIRIT.book Page 41 Friday, April 8, 2005 9:55 AM