Samsung Digimax i5 - Manual (Page 110)

《 110 》
Before contacting a service centre
Camera does not take images when pressing the Shutter button
ㆍ There is insufficient memory capacity
→ Delete unnecessary image files
ㆍ The memory card has not been formatted
→ Format the memory card (p.97)
ㆍ The memory card is exhausted
→ Insert a new memory card
ㆍ The memory card is locked
→ Refer to [Card Locked!] error message (p.108)
ㆍ The camera’s power is off
→ Turn the camera power on
ㆍ The battery are exhausted
→ Insert charged battery (p.14 ~ 18).
ㆍ Battery is inserted incorrectly with the reverse polarities
→ Insert the battery according to the polarity marks (+, -)
The camera suddenly stops working while in use
ㆍ The camera was stopped due to a malfunction
→ Remove /re-insert battery and switch the camera on
The images are unclear
ㆍ A picture was taken within 0.5m from the subject without setting an appropriate macro mode
→ If the subject is closer than 0.5m, select macro shot mode
ㆍ Taking a picture beyond the flash range
→ Take a picture within the flash range
ㆍ The lens is smudged or dirty
→ Clean the lens
The flash does not fire
ㆍ Flash off mode has been selected
→ Dis-engage flash off mode
ㆍ The camera mode can’t use the flash
→ Refer to the FLASH instruction (p.37)
Incorrect date and time is displayed
ㆍ The date and time have been set incorrectly or the camera has adopted the default settings
→ Reset the date and time correctly