Connecting to a power source, Information – Samsung Digimax i5 User Manual

Page 16

Advertising
background image

16

Connecting to a Power Source

Charging LED of the SAC-41

Status

Using the cradle

Direct to the camera

Being Charged

Red LED is on

Red LED is on

Charging is complete

Green LED is on

Green LED is on

Charging error

Red LED is off or blinking

Red LED is off or blinking

If there is a charging error, please check all the power connections are in place.

A USB cable for transmitting data can’t be used for charging the rechargeable battery.

Charging time (When the camera is turned off)

- Using the cradle

: About 150MIN

- Using the SAC-41 : About 150MIN

Important information about the rechargeable battery.

If you charge the battery with the camera power on, the battery can't charge fully.
To charge the battery fully, turn the camera off when you charge it.

If you insert the fully discharged battery to charge it, do not turn on the camera at the
same time. The camera may not be turned on because of the low battery capacity.
Charge the battery for over 10 minutes to use the camera.

Do not use the flash frequently or take a movie clip with the fully discharged battery
charged for a short time. Even if the charger is inserted, the camera power may be turned
off because the rechargeable battery is discharged again.

INFORMATION

Advertising