Sharp DX-B450P - Manual (Page 118)

9-8 User’s Guide
Noise
Troubleshooting
Noise
Error and Warning Messages
Your printer’s Operator Panel provides you with information and troubleshooting help. When
an error or warning condition occurs, the Operator Panel displays a message informing you of
the problem.
Warning Messages
The following table lists warning messages, possible causes, and the actions required to correct
each cause. When Warning messages are displayed, the printer continues to operate.
Status Items to check Action
Strange noise occurs. Is the printer placed on a flat location? Shift the printer to a stable surface.
Is the top cover open? Close the top cover tight.
Is the paper tray pushed in? Push the paper tray completely into the
printer.
Are there foreign objects inside the
printer? Switch off the power and remove any
foreign objects inside the printer.
If the object cannot be removed unless
the printer is disassembled, contact
Technical Support.
Warning Message
Line 2 of display Possible Cause Action
Paper Out Tray 1 There is no paper in Tray 1. Add paper to the tray.
Paper Out Tray 2 There is no paper in Tray 2. Add paper to the tray.
Paper Out Tray 3 There is no paper in Tray 2. Add paper to the tray.
Paper Out Tray 4 There is no paper in Tray 4. Add paper to the tray.
Output Tray Full The Standard Output Tray is full. Remove paper from the tray.
Offset Tray Full The Offset Catch Tray is full. Remove paper from the tray.
Toner Low The toner is low. Replace the Toner Cartridge soon. Users can
press the Start button to continue printing with
low toner. See “System Menu” on page 3-15
for more information.