Sanyo DP55441 - Manual (Page 20)

19
English
PICTURE/ AUDIO/ ADVANCED
ADJUSTMENT
PICTURE
ADJUSTING THE PICTURE LEVELS
PICTURE MODE OPERATION
1
Press the MENU button on the remote control to
display the Main menu.
2
Use the CURSOR
◄ and ► buttons to highlight
PICTURE. Press the OK button.
3
Use the CURSOR
▲ and ▼ buttons to select the
Picture Mode. Press the OK button.
4
Use the CURSOR
▲ and ▼ buttons to select the
Cinema, Standard, Vivid or User. Press the OK
button to add a red hook in the blank space.
BRIGHTNESS/ CONTRAST/ SATURATION/ HUE/
SHARPNESS OPERATION
1
Press the MENU button on the remote control to
display the Main menu.
2
Use the CURSOR
◄ and ► buttons to highlight
PICTURE. Press the OK button.
3
Use the CURSOR
▲ and ▼ buttons to select
the Brightness, Contrast, Saturation, Hue or
Sharpness. Press the OK button.
4
Use the CURSOR
◄ and ► buttons to adjust the
picture setting.
NOTE:
• These items will be grayed out if you are not select the
User mode.
• User mode (Picture Mode) will allow to adjust brightness,
contrast,saturation,hue and sharpness function by user.
COLOR TEMPERATURE OPERATION
1
Press the MENU button to display the Main menu.
Press the OK button.
2
Use the CURSOR
◄ and ► buttons to highlight
PICTURE. Press the OK button.
3
Use the CURSOR
▲ and ▼ buttons to highlight
Color Temperature. Press the OK button.
4
Use the CURSOR
▲ and ▼ buttons to select
Warm, Normal or Cool. Press the OK button.
VIDEO2 OPERATION
1
Press the MENU button to display the Main menu.
Press the OK button.
2
Use the CURSOR
◄ and ► buttons to highlight
PICTURE. Press the OK button.
3
Use the CURSOR
▲ or ▼ buttons to highlight
Video2. Press the OK button.
4
Use the CURSOR
▲ and ▼ buttons to select
YPbPr or Video. Press the OK button.
RESET PICTURE OPERATION
Reset Picture- Make the previous adjustment settings
under the PICTURE mode recovered from the factory
default value.
1
Use the CURSOR
◄ and ► buttons to highlight
PICTURE. Press the OK button.
2
Use the CURSOR
▲ and ▼ buttons to highlight
Reset Picture. Press the OK button.
3
Use the CURSOR
▲ and ▼ buttons to select
Reset or Cancel. Press the OK button.
NOTE : Press the MENU button to return to the PICTURE
mode menu.
AUDIO
SOUND MODE OPERATION
1
Press the MENU button on the remote control to
display the Main menu.
2
Use the CURSOR
◄ and ► buttons to highlight
AUDIO. Press the OK button.
3
Use the CURSOR
▲ and ▼ buttons to select Sound
Mode. Press the OK button.
4
Use the CURSOR
◄ and ► buttons to adjust the
audio setting.(Off/Rock/Pop/Jazz/Vocal/User).
NOTES:
• User mode (Sound Equalizer) will allow to adjust
frequency response from 100Hz to 10kHz by user.
• Use the CURSOR
▲ and ▼ buttons to select frequency.
• Use the to CURSOR
◄ and ► buttons to adjust the
frequency setting.