Sanyo DP55441 - Manual (Page 22)

21
English
signals usually will not need noise reduction.
MPEG NR OPERATION
1
Press the MENU button on the remote control to
display the Main menu.
2
Use the CURSOR
◄ and ► buttons to highlight
ADVANCED. Press the OK button.
3
Use the CURSOR
▲ and ▼ buttons to select
MPEG NR. Press the OK button.
4
Use the CURSOR
▲ and ▼ buttons to select Off,
Weak, Medium or Strong. Press the OK button.
DYNAMIC AI OPERATION
1
Press the MENU button on the remote control to
display the Main menu.
2
Use the CURSOR
◄ and ► buttons to highlight
ADVANCED. Press the OK button.
3
Use the CURSOR
▲ and ▼ buttons to select the
Dynamic AI. Press the OK button.
4
Use the CURSOR
▲ and ▼ buttons to select Off,
Weak, Medium or Strong. Press the OK button.
NOTE : Please set PICTURE MODE to User then can turn
on this function PAGE 19.
PICTURE (PIX) SHAPE OPERATION
Pix Shape- Divided into three categories. The options
during the Pix Shape mode change by the detection of
HD, SD or PC inputs.
HD: Full / WaterGlass / Zoom1 / Zoom2
SD: Standard / WaterGlass / Zoom1 / Full / Zoom2
PC: Normal / Full / Dot by Dot
1
Press the MENU button on the remote control to
display the Main menu.
2
Use the CURSOR
◄ and ► buttons to highlight
ADVANCED. Press the OK button.
3
Use the CURSOR
▲ and ▼ buttons to select Pix
Shape. Press the OK button.
4
Use the CURSOR
▲ and ▼ buttons to select
Standard, WaterGlass, Zoom1, Full or Zoom2.
Press the OK button.
NOTE : The remote controls of HD cable and satellite
boxes also have similar zoom choices. Try having
the TV setting on FULL first, and adjust via the
cable/satellite box's remote control.
BACKLIGHT OPERATION
1
Press the MENU button on the remote control to
display the Main menu.
2
Use the CURSOR
◄ and ► buttons to highlight
ADVANCED. Press the OK button.
3
Use the CURSOR
▲ and ▼ buttons to select
Backlight. Press the OK button.
4
Use the CURSOR
◄ and ► buttons to select the
desired value between 0 to 50.
NOTE:
• This item will be grayed out if you turn on the Light
sensor function.
• Please set Light sensor operation to off then can turn on
this function.
LIGHT SENSOR OPERATION
Picture brightness will automatically be boosted or reduced
depending on the room brightness.
1
Press the MENU button on the remote control to
display the Main menu.
2
Use the CURSOR
◄ and ► buttons to highlight
ADVANCED. Press the OK button.
3
Use the CURSOR
▲ and ▼ buttons to select Light
Sensor. Press the OK button.
4
Use the CURSOR
▲ and ▼ buttons to select Off
,Low ,Middle or High. Press the OK button.
NOTE:
• The initial setting of Light sensor in the Home mode is
High
.
• Change this setting to Middle, Low or Off if a picture is
too dark in your home.
OSD DISPLAY TIME OPERATION
OSD Display Time
1
Press the MENU button on the remote control to
display the Main menu.
2
Use the CURSOR
◄ and ► buttons to highlight
ADVANCED. Press the OK button.
3
Use the CURSOR
▲ and ▼ buttons to select the
OSD Display Time option. Press the OK button.
4
Use the CURSOR
◄ and ► buttons to choose
from 20 Seconds, 30 Seconds, 40 Seconds, 50
Seconds or 60 Seconds. Press the OK button.
NEXT PAGE OPERATION
NEXT PAGE - Jump to next page menu.
1
Press the MENU button on the remote control to
display the Main menu.
2
Use the CURSOR
◄ and ► buttons to highlight
ADVANCED. Press the OK button.
3
Use the CURSOR
▲ and ▼ buttons to select the
Next Page.
4
Press the OK button to jump to the next page.
120Hz CONDITION OPERATION
1
Press the MENU button on the remote control to
display the Main menu.
2
Use the CURSOR
◄ and ► buttons to highlight
ADVANCED. Press the OK button.
3
Use the CURSOR
▲ and ▼ buttons to select the
Next Page. Press the OK button.
4
Use the CURSOR
▲ and ▼ buttons to select the
120Hz Condition option.
5
Use the CURSOR
◄ and ► buttons to adjust the
120Hz Condition setting to On or Off.