Siemens HIPATH 5000 - Manual (Page 28)

Step by Step
Making Calls – Convenience Functions
28
If the second party does not answer:
Press this key and wait two seconds.
or (depending on the configuration)
Press the key twice.
Adding Up to Five to the Conference (Initiator Only)
Press the key. LED flashes.
o
Call the new party. Announce the conference.
qg
Press the key. Enter the code. The LED goes out,
etc.
Leaving a Conference
t
Replace the handset.
Ending a Conference (Initiator Only)
rg
Press the key. LED flashes. Enter the code.
Removing the ISDN Central Office Party
From the Conference (Only for U.S., Not for
HiPath 500)
Press the key. LED flashes.
qhme
Enter the code.
Activating Tone Dialing/DTMF Suffix-Dialing
You can transmit dual-tone multifrequency (DTMF)
signals to control devices such as an answering
machine or automatic information system.
s
You have set up a connection.
qig
Press the key. LED flashes. Enter the code.
o
You can use the keys "0" through "9", " * ", and "#" to
transmit DTMF signals.
Consultation
Consultation
Consultation
Consultation
Consultation
Consultation
Consultation
Ending the call also deactivates DTMF suffix
dialing.
Your system may be configured so that you can
start DTMF suffix-dialing immediately after
setting up a connection.