Samsung HMX-U10EP/U100EP - Manual (Page 66)

58_English
settings options
lCD Brightness
You can adjust the brightness of the LCD screen to compensate for ambient lighting conditions.
settings contents on-screen display
Normal Standard brightness. None
Bright Brightens the LCD screen. None
A brighter LCD screen setting consumes more battery power.
If you adjust the LCD brightness when the ambient lighting is too bright, it is hard to see the LCD screen indoors.
LCD Brightness does not affect the brightness of images to be stored.
•
•
•
Auto lCD Off
To reduce power consumption, the brightness of the LCD screen is automatically dimmed if the camcorder is idle for
more than 2 minutes.
settings contents on-screen display
Off Disables the function. None
On
When there is no operation for more than 2 minutes in the STBY mode or during recording,
the power saving mode starts with the LCD screen dimmed.
None
When this " Auto lCD Off" function is enabled, you can press any button on the camcorder to return LCD brightness to normal.
Auto lCD Off will be disabled in the following cases:
- If the DC power cable (AC power adaptor) is connected.
•
•
Beep Sound
You can set the beep sound to on/off. If there is a beep sound when operating the menu settings, the setting is turned on.
settings contents on-screen display
Off Disables the function. None
On When on, a beep will sound every time a button is pressed. None
The Beep sound function is cancelled in the following cases:
- During recording, playing
- When the camcorder has a cable connection. (component/AV cable)