Samsung HMX-U10EP/U100EP - Manual (Page 72)

64_English
USING THE Intelli-studio pROGRAMME
Using the built-in Intelli-studio programme in your camcorder, you can transfer video/photo fi les onto your PC and edit them on
your computer. The Intelli-studio offers the most convenient way for you to manage video/photo fi les by using the simple USB cable
connection between the camcorder and your PC.
Starting the Intelli-studio programme
Step 1. Connecting the USB cable
1. Set the menu setting to "PC Software: On". page 60
You will fi nd the default menu settings are set as shown at right.
2. Connect the camcorder and the PC with the USB cable.
A new fi le saving screen appears with the Intelli-studio main window.
According to your computer type, the corresponding removable disk window appears.
3. Click "yes", the uploading procedure will start.
Uploading to the computer is fi nished.
If you do not want to save a new fi le, select "No."
Disconnecting the USB cable
After completing the data transfer, make sure to disconnect the cable in the following way:
1. Click on the "Safely Remove Hardware icon" icon on the taskbar.
2. Select "USB Mass Storage Device", and then click "Stop".
3. If the "Stop a Hardware device" window appears, click "OK."
4. Disconnect the USB cable from the camcorder and PC.
Use the provided USB cable. (Supplied by Samsung)
Don’t apply excessive force when inserting or extracting the USB cable into/from a USB jack.
Insert the USB after checking the correct direction of its insertion.
We recommend using the AC power adaptor as the power supply instead of the battery.
When the USB cable is connected, turning the camcorder on or off may cause the PC to malfunction.
If you disconnect the USB cable from the PC or the camcorder while transferring data, the data transfer will stop and the data may be damaged.
If you connect the USB cable to a PC via a USB HUB or simultaneously connect the USB cable along with other USB devices, the camcorder may
not work properly. If this occurs, remove all USB devices from the PC and reconnect the camcorder.
According to your computer type, the Intelli-studio programme may not run automatically. In this case, open the desired CD-ROM drive that has the
Intelli-studio programme in My Computer and run iStudio.exe.
When a USB cable is connected, if you have EmoDio (Samsung's MP3 player software) installed on your computer, the EmoDio software may load
fi rst.
While the camcorder and the PC with the USB cable, the built-in battery are use as the camcorder power. And so we recommend using the AC power
adaptor as the power supply instead of the battery.
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
using with a Windows computer
Settings
TV Out
PC Software
NTSC/PAL
Off
On
Back Select Move