Sony HT-AF5 - Manual (Page 21)

21 GB
Getting Star
ted
Notes on speaker cords
• The connector of the speaker cords are the
same colour as the speaker jack to be
connected. When connecting a speaker cord,
be sure to match the coloured connector to
the speaker jack on the subwoofer:
• Be sure to match the speaker cords to the
appropriate terminals on the speakers: the
speaker cord with the colour tube to e
terminal, and the speaker cord without the
colour tube to E terminal.
To connect the speakers
correctly
Check the speaker type by referring to the
speaker label at the rear panel of the speakers.
For details on the speaker type, see page 5 (for
HT-AF5 only) or page 6 (for HT-AS5 only)
3: Connecting the audio/
video components
Before connecting the cords, be sure to
disconnect the AC power cord (mains lead).
It is not necessary to connect all the cords.
Connect audio and video cords according to
the jacks of your components.
After hooking up all your components,
proceed to “4: Connecting the antennas
(aerials)” (page 25).
Sony recommends that you connect
components to the system using an HDMI
cable.
By connecting Sony “BRAVIA” Sync
compatible components using HDMI cables,
““BRAVIA” Sync Features” makes
operations simpler (page 41).
When connecting components that are not
compatible with “BRAVIA” Sync, set
“CTRL HDMI” to “CTRL OFF” in the SET
HDMI menu (page 43).
Connector Speaker jack
Red FRONT R
White FRONT L
Grey SUR R
Blue SUR L
Green CENTER
Character on
speaker label Speaker type
FRONT L Front left
FRONT R Front right
CENTER Center
SUR L Surround left
SUR R Surround right
Connecting TV, DVD recorder
and Blu-ray Disc player
continued