Sony MSW-M2100 User Manual
Page 79
Chapter 8
Setup Menus
Chapter 8 Setup Menus
8-9
Menu items in the range 100 to 199, relating to the control panels (Continued)
118
Select which switches and buttons can be operated when the KEY INHIBIT
switch on the switch panel is set to ON. The following sub-items control different
sets of switches and buttons independently.
REMOTE
SELECT
Sub-item
Select whether the REMOTE 1(9P) and 2(50P) buttons in the upper control panel
are enabled.
DIS : Disabled
ENA: Enabled
2
AUDIO/F-KEY
1
Select whether the audio signal selection buttons and F1 to F6 buttons in the
lower control panel are enabled.
DIS : Disabled
ENA: Enabled
3
MODE CONTROL Select which switch and button operations can be carried out from the lower
control panel of this unit or an external control panel connected to this unit.
DIS : All switches and buttons other than the audio signal selection buttons and
F1 to F6 buttons are disabled.
DMC: All switches and buttons for DMC playback other than the audio signal
selection buttons and F1 to F6 buttons are disabled.
ENA: All switches and buttons other than the audio signal selection buttons and
F1 to F6 buttons are enabled.
119
VARIABLE SPEED LIMIT
IN KEY PANEL CONTROL
Select the playback speed range when carrying out playback in variable speed
mode from the control panel of this unit.
OFF : For MPEG IMX and analog tapes, from –1 to +3 times normal speed; for
Digital Betacam tapes, from –1 to +3 times normal speed; for Betacam SX
tapes, –1 to +2 times normal speed.
ON: For MPEG IMX, Betacam SX, Digital Betacam tapes, and analog tapes, from
0 to 1 times normal speed.
120
CTL LOCK IN VAR/SHTL
Select whether the tape transport should be phase-locked to the CTL signal
during playback in variable speed or shuttle mode.
OFF : Not phase-locked.
ON: Phase-locked at the following speeds: –1, –0.5, 0.5, 1.0 and 2.0 times
normal.
Item number Item name
Settings
125
AUTO REWIND
Select whether to rewind the tape automatically when playback reaches the end
of a tape.
DIS: Do not rewind the tape automatically.
ENA : Rewind the tape automatically.
130
TIMER DISPLAY
DIMMER CONTROL
Set the brightness of the time data/menu display panel.
0 to 7 : Set in this range. 0 is the brightest, and 7 the dimmest.
132
AUDIO PB VOLUME
Select whether each of the audio PB controls on the lower control panel is
effective to control the audio playback level on each channel or the CH8/ALL CH
control alone functions as a master control to control the audio playback level on
all channels together.
EACH : Each PB control is effective to control each channel.
ALL: The CH8/ALL CH control alone functions as a master control.
When “ALL” is selected, the ALL CH indicator to the right of the CH8/ALL CH
control lights up.
KEY INHIBIT SWITCH
EFFECTIVE AREA
121
DT MODE
Select field or frame mode for variable speed playback.
FIELD: Always field playback
FRAME: Frame playback in the noiseless playback speed range; otherwise field
playback.
Frame playback provides higher-density still pictures than field playback.
Note
When using the digital Betacam format, this frame mode is valid for playback in
the positive direction only.
(Continued)