Sony MSW-M2100 - Manual (Page 81)

Chapter 8
Setup Menus
Chapter 8 Setup Menus
8-11
Menu items in the range 300 to 399, relating to editing operations
Item number Item name Settings
301 VAR SPEED RANGE FOR
SYNCHRONIZATION Select the playback speed range when carrying out playback in variable speed
mode from a remote control unit connected to the REMOTE-1 IN(9P) connector
or REMOTE-1 OUT (9P) connector.
–1~+3 : For MPEG IMX tapes, analog tapes, and Digital Betacam tapes, from –1
to +3 times normal speed; for Betacam SX tapes, –1 to +2 times normal
speed.
~+3.45 : For MPEG IMX tapes, analog tapes, and Digital Betacam tapes, from –
1 to +3.45 times normal speed; for Betacam SX tapes, –1.5 to +2.3 times
normal speed.
WIDE: Undefined
302 CAPSTAN RE-LOCKING
DIRECTION In 525-line mode
When the function menu item CAPSTN is set to 4F, select whether the capstan
servo should lock by accelerating or decelerating.
DECEL : Lock by decelerating.
ACCEL: Lock by accelerating.
In 625-line mode
When the function menu item CAPSTN is set to 4F or 8F, select whether the
capstan servo should lock by accelerating or decelerating.
DECEL: Lock by decelerating.
ACCEL : Lock by accelerating.
307 AUTO-DELETION FOR
INCONSISTENT DATA Select what happens when an erroneous DMC playback control point is set.
MANU : A warning is given by flashing the DELETE button on the lower control
panel.
The operator must manually delete the unnecessary DMC playback control
points or correct the erroneous DMC playback control point.
NEG&E: When inconsistent DMC playback control points are set, such as when a
speed variation end point is before a speed variation start point, or an on-air
end point is before an on-air start point, or when too many DMC playback
control points are specified, the previously set DMC playback control point is
deleted.
NEG: When inconsistent DMC playback control points are set, such as when a
speed variation end point is before a speed variation start point, or an on-air
end point is before an on-air start point, the previously set DMC playback
control point is deleted. When more DMC playback control points than
necessary are specified, the DELETE button on the control panel flashes to
give a warning.
Note
Pressing the button corresponding to a DMC playback control point to be deleted
and the DELETE button simultaneously, deletes the DMC playback control point.
If an erroneous DMC playback control point is set (the DELETE button is
flashing), DMC playback is not executed.
306 DMC INITIAL SPEED Select the initial speed automatically set when carrying out DMC playback.
MANU : The speed determined by the rotation of the search dial
PLAY: Normal playback speed
STILL: Stationary
±0.03 to ±1, +2: Speed set in the range ±0.03 to +2 (select from +2, ±1, ±0.5,
±0.2, ±0.1, ±0.03)
Note
If you want to carry out DMC playback after setting this menu item, first press the
DMC EDIT and DELETE buttons simultaneously to turn off the DMC EDIT button.
320 DIGITAL AUDIO PB
PROCESS ON EDIT
POINT Select the treatment of audio playback at edit points.
CUT : Carry out cut editing (possibly resulting in audio discontinuities at the edit
point).
FADE: Fade out and fade in.