Sony MSW-M2100 - Manual (Page 88)

Chapter 8
Setup Menus
8-18
Chapter 8 Setup Menus
8-4 Items in the Extended Setup Menu
Menu items in the range 800 to 899, relating to audio control (Continued)
Item number Item name Settings
827 AES OUT SEL Select the audio signals to assign to AES/EBU audio output channels.
APPI-DSP software Version 0.90 or higher is required to display this menu item.
Note
Check to be sure that the selected tracks are being output from the AES/EBU
OUTPUT connectors.
Sub-item
1 CH1/CH2 tr1/2 : Assign tracks 1, 2 to output channels 1, 2.
tr3/4: Assign tracks 3, 4 to output channels 1, 2.
tr5/6: Assign tracks 5, 6 to output channels 1, 2.
tr7/8: Assign tracks 7, 8 to output channels 1, 2.
2 CH3/CH4 tr1/2: Assign tracks 1, 2 to output channels 3, 4.
tr3/4 : Assign tracks 3, 4 to output channels 3, 4.
tr5/6: Assign tracks 5, 6 to output channels 3, 4.
tr7/8: Assign tracks 7, 8 to output channels 3, 4.
828 SDI OUT SEL Select the audio signals to assign to SDI audio output channels.
The HD-SDI OUTPUT connector of the UP-CONTROL option also follows this
menu item.
Note
Check to be sure that the selected tracks are being output from the SDI OUTPUT
connectors.
Sub-item
1 CH1/CH2 tr1/2 : Assign tracks 1, 2 to output channels 1, 2.
tr3/4: Assign tracks 3, 4 to output channels 1, 2.
tr5/6: Assign tracks 5, 6 to output channels 1, 2.
tr7/8: Assign tracks 7, 8 to output channels 1, 2.
2 CH3/CH4 tr1/2: Assign tracks 1, 2 to output channels 3, 4.
tr3/4 : Assign tracks 3, 4 to output channels 3, 4.
tr5/6: Assign tracks 5, 6 to output channels 3, 4.
tr7/8: Assign tracks 7, 8 to output channels 3, 4.
829 SDTI OUT SEL Select the audio signals to assign to SDTI audio output channels.
Settings for SDTI CH5 to CH8 SEL are impossible for hardware reasons. DIF-
FPGA change is required.
This menu item applies when APR Board-14 or higher is installed.
Note
Check to be sure that the selected tracks are being output from the SDTI
OUTPUT connectors.
Sub-item
1 CH1/CH2 tr1/2 : Assign tracks 1, 2 to output channels 1, 2.
tr3/4: Assign tracks 3, 4 to output channels 1, 2.
tr5/6: Assign tracks 5, 6 to output channels 1, 2.
tr7/8: Assign tracks 7, 8 to output channels 1, 2.
2 CH3/CH4 tr1/2: Assign tracks 1, 2 to output channels 3, 4.
tr3/4 : Assign tracks 3, 4 to output channels 3, 4.
tr5/6: Assign tracks 5, 6 to output channels 3, 4.
tr7/8: Assign tracks 7, 8 to output channels 3, 4.