Sony MSW-M2100 - Manual (Page 36)

Chapter 4
Playback
4-2
Chapter 4 Playback
4-1 Preparations for Playback
4-1-2 Time Data Selection
Displayed time data
Use the CTL/TC setting in function menu HOME page
to select one of CTL (control), time code, and user bit
values. When you select time code, the data displayed
is determined by the TCR setting (LTC/AUTO/VITC)
in function menu page 1 as follows.
Output time code
The setting of setup menu item 606 determines
whether the time code output from the TIME CODE
OUT connector is the time code generated by the
internal time code generator (REGEN), or the
playback time code (TAPE).
4-1-3 Playback With SDTI-CP
Output
Irrespective of tape format, video and audio signals
can be played back only at normal playback speed.
TCR setting Displayed data
LTC LTC recorded on tape
AUTO LTC or VITC (automatically switched)
VITC VITC recorded on tape