2-3 playback in shuttle mode, 2-4 playback in variable speed mode – Sony MSW-M2100 User Manual

Page 38

Advertising
background image

Chapter 4

Playback

4-4

Chapter 4

Playback

4-2 Playback Procedures

3

To stop playback in jog mode, stop turning the
search dial.

The function to toggle between jog mode and shuttle

mode each time the search dial is pressed can be
disabled by changing the setting of setup menu item
101.

4-2-3 Playback in Shuttle Mode

In shuttle mode, you can control the speed of playback
by the angular position of the search dial. The range
of playback speed is as follows:
• Using a Digital Betacam tape: ±50 times
• Using an MPEG IMX tape: ±60 times
• Using a Betacam SX tape: ±60 times
• Using an analog Betacam tape: ±35 times (for 525/60

mode) or ±42 times (for 625/50 mode)

There are detents on the search dial at the still position
and at ±5 times normal speed.
To carry out playback in shuttle mode, use the
following procedure.

1

Press the SHUTTLE button or search dial so that
the SHUTTLE button is lit.

Pressing the search dial toggles between jog mode
and shuttle mode.

2

Turn the search dial to the desired angle
corresponding to the desired playback speed.

Playback in shuttle mode starts.

3

To stop playback in shuttle mode, return the search
dial to the center position, or press the STOP
button.

The function to toggle between jog mode and shuttle

mode each time the search dial is pressed can be
disabled by changing the setting of setup menu item
101.

To return to normal-speed playback
Press the PLAY button.

To alternate between normal-speed playback
and shuttle mode playback
Set the search dial to the position corresponding to the
desired shuttle playback speed, then switch between
normal-speed playback and shuttle playback by
pressing the PLAY and SHUTTLE buttons alternately.
For intermittent shuttle mode playback, press the
STOP and SHUTTLE buttons alternately.

4-2-4 Playback in Variable Speed
Mode

In variable speed mode, you can finely control (51
steps) the playback speed in the following speed
ranges depending on the tape format.

Digital Betacam: –1 to +3 times normal speed
MPEG IMX: –1 to +3 times normal speed
Betacam SX: –1 to +2 times normal speed
Betacam/Betacam SP: –1 to +3 times normal speed

There are detents on the search dial at the still position
and at ±1 times normal speed.
To carry out playback in variable speed mode, use the
following procedure.

1

Press the VAR button, turning it on.

Z

1

1,2,3

3

Z

1

2,3

3

Advertising
This manual is related to the following products: