SUPER MICRO Computer AS1011M-T2 - Manual (Page 3)

iii
Preface
Preface
About This Manual
This manual is written for professional system integrators and PC technicians. It
provides information for the installation and use of the AS1011M-T2 server. Instal-
lation and maintenance should be performed by experienced technicians only.
The AS1011M-T2 is a high-end server based on the SC811FT-260 1U rack-
mount chassis and the H8SMi-2, a single processor motherboard that supports
AMD Opteron processors and up to 8 GB of unbuffered ECC/non-ECC DDR2-
800/667/533 SDRAM.
Manual Organization
Chapter 1: Introduction
The fi rst chapter provides a checklist of the main components included with the
server system and describes the main features of the H8SMi-2 motherboard and
the SC811FT-260 chassis, which comprise the 1011M-T2.
Chapter 2: Server Installation
This chapter describes the steps necessary to install the 1011M-T2 into a rack and
check out the server confi guration prior to powering up the system. If your server
was ordered without processor and memory components, this chapter will refer you
to the appropriate sections of the manual for their installation.
Chapter 3: System Interface
Refer here for details on the system interface, which includes the functions and
information provided by the control panel on the chassis as well as other LEDs
located throughout the system.