Sanyo PDP-42XR9DA - Manual (Page 18)

Basic Operations
(Continued)
15
Displaying the Information Banner
Press the INFO button to display the information banner. The information banner displays current status information such as
the channel number and signal source.
Depending on the mode, different information is displayed. In DTV mode, more information will be displayed. Below is an
example banner in DTV mode.
= The above OSD is only served as an example, and it is in DTV mode.
= Information banner content varies, depending on the broadcaster and your settings.
In DTV mode, the information banner may contain:
! Channel number and name.
! Current time.
! Current program name, start and end play times.
! Next program name and start and end play times.
! TV or Radio.
! Audio mode, audio track.
! Signal strength for current channel.
! Signal resolution.
! Subtitle, teletext.
Selecting the Input Signal Source
1
2
3
Press SOURCE button.
Press 3 ,4 or OK to confirm the selection.
Press 6 or 5 to select the input source. Options include:
! DTV — Watch the DTV signal.
! ATV — Watch the ATV signal.
! AV — Watch the signal from the AV input terminals.
! Component 1 — Watch the signal from the COMPONENT 1 input terminals.
! Component 2 — Watch the signal from the COMPONENT 2 input terminals.
! D-SUB — Watch the signal from the D-SUB input jack.
! HDMI 1 — Watch the signal from the HDMI 1 input jack.
! HDMI 2 — Watch the signal from the HDMI 2 input jack.
! HDMI 3 — Watch the signal from the HDMI 3 input jack.
Select Move
DTV
AV
Component 1
Component 2
D-SUB
HDMI 1
HDMI 2
HDMI 3
Input Source
ATV
Note
2 ABC TV Sydney
SD MPEG
DTV
11:08 British Isles: A Natural History
Reserved for future use
Fri, Feb 27 2008 11:05 12:00
Subtitle English Teletext 576i
Alan Titchmarsh continues his epic journey around the
British Isles and discovers why they are so diverse.
Next