Sanyo PDP-42XR9DA - Manual (Page 27)

24
System Setup
System Setup
1
3
Press MENU and the main menu screen displays.
Within the menu, press 5 ,6 ,3 ,4 to navigate through the options
or adjust an option.
Press 3 or4 to select Option menu, press 6 to access the menu.
2
You may change system settings such as Hearing impaired, SPDIF, Audio Preference, etc. by making use of Option menu.
Press MENU to return to previous menu. Press EXIT to exit the
menu screen directly.
4
Option Description
Allow Update Press 3 /4 to select On to allow system update.
System Update Time
SPDIF
(Only for digital programs)
Auto: Output audio signal by the rule: If current audio track is in Dolby Digital format, then Dolby
Digital format will be selected. If current audio track is in MPEG, then PCM format will be selected.
MPEG: If the program has MPEG and Dolby Digital tracks, select MPEG to output MPEG track in
preference.
Dolby Digital: If the program has MPEG and Dolby Digital tracks, select Dolby Digital to output
Dolby Digital track in preference.
PCM: Output audio signal by PCM format.
Audio Preference
(Only for digital programs)
Selects the audio track to output. You can select MPEG or Dolby Digital.
Selects the digital audio output mode for S/PDIF. You can select Auto or PCM.
Note: To select Auto is recommended.
Note: You should first set this item to On before performing system update time function.
Select Off to turn off the function.
Hearing Impaired
(Only for digital programs)
Press 3 /4 to select On to display the subtitles (if available) for the hearing impaired.
Select Off to turn off the function.
Press 4 or OK to display the System Update Time screen, then set On time. When the TV is in
standby mode, the TV will automatically turn on at the preset time and detect OTA, then start
system update.
Picture Sound Time Option Lock Channel
Select Move Menu Exit
System Update Time
SPDIF Auto
Audio Preference Dolby Digital
Allow Update On
Hearing Impaired On
03:00