Star Trac IP-S6331 User Manual
Page 9
Page 9
INSTALLING THE TOP BUMPER:
1.
After both shrouds have been installed
install the black TOP BUMPER by first
inserting the two tabs (1) found on the
large end of the TOP BUMPER into the
equipment main frame. Now rotate (2) the
TOP BUMPER down until it is sitting flush
on top of the weight frame. Install the
(M6,30MM,Button Head Bolt) (3) through
the weight frame into the TOP BUMPER
as shown and tighten to 1.0 N-m max.
Before using this product, it is essential to read the ENTIRE operations manual and ALL
installation Instructions. The Owner’s manual describes equipment setup and instructs
members on how to use it correctly and safely.
Health related injuries may result from incorrect or excessive use of exercise
equipment. Star Trac strongly recommends you to encourage you and your members to
discuss their health program or fitness regimen with a health care professional,
especially if you or they have not exercised for several years, are over 35, or have
known health conditions.
WARNING!
MACHINE CLEARANCE AND SPACING
For the safe operation of Inspiration Strength™ Star Trac recommends that a clearance of 24 inches
(60.96cm) be maintained between and behind machines including moving arms and levers. To insure
safe entry and exit to each unit a walkway of at least 36 inches (91.44cm) inches is recommended
front of, or on the entry side of each machine.