Silvercrest CDV-710 - Manual (Page 50)

50
Deutsch
English
18 Displaying images
This function allows you to display images on the screen. You can use this function for CD/DVD
data carriers as well as for a SD/MMC memory card. The navigation of this function generally
functions just as during the playback of MP3, WMA and OGG Vorbis files.
18.1 Slide show
To display the images in a slide show, change to the corresponding data carrier by pressing the
“MODE” button . To get to the desired image, please use the five-way multifunction button
to navigate. With this button you can navigate upward and downward. With images, a thumbnail
preview will appear. If you press the button to the left, you will return to the higher level folder.
Press the button regularly to display the image at the full screen size. Now the slide show is
started.
18.2 Rotating an image
During the slide show, you have the option of rotating the current image to the right or left by
pressing the five-way multifunction button .
18.3 Zoom
The zoom function gives you the option of having the images and films displayed in an enlarged
or reduced format.
To activate the zoom function, press the ZOOM button on the remote control for at least three
seconds. The message “ZOOM 100%” will appear. Now the buttons and on the remote
control as well as on the device will allow you to set the zoom value. The button decreases -
the button increases the zoom value. The following levels are available: 50%, 75%, 100%,
125%, 150% and 200%. If the zoom level is larger than 100%, you have the option of moving