Silvercrest CDV-710 - Manual (Page 63)

63
Deutsch
English
LPCM (linear PCM) OUTPUT allows you to select either the audio CD
standard (48K) or the DVD standard (96K).
Dolby digital
settings
Through this menu you can adjust the behaviour of the Dolby function
according to your own preferences and determine the desired type of output.
Stereo = stereo sound, R-mono and L-mono each play back the sound only
through the selected channel. The setting mix-mono only functions during the
DVD playback with DTS 5.1.
In addition, you have the option of setting the level of the linear compression.
Different levels are available to you here (OFF, 1/8, 1/4, 3/8, 1/2, 5/8, 3/4, 7/8,
FULL).
Equalizer
settings
Through this function you can adjust the tone colour of the output sound
according to your own preferences.
Through the EQ type, you can select the preset sound settings.
The menu item bass increase just allows you to increase the bass
frequencies.
With super bass, you have an additional option of increasing the bass output.
The setting treble increase also allows you to increase the treble levels
correspondingly.
3D Effect
settings Through this function you can adjust the sound effects of the output sound
according to your own preferences.
The echo mode setting enables you to select one of the preset reverberating
effects.
HDCD The HDCD function enables you to carry out certain settings if you are using
such a data carrier. Because of the low market distribution of this type of data
carrier, this function is turned off by default.