Silvercrest CDV-710 User Manual
Page 8
8
Deutsch
English
Don’t flip the monitor open by hand. This could damage the mechanics.
The TFT colour monitor consists of glass and liquid crystals. Don’t put any excessive
pressure on the monitor, since otherwise it might scratch, break, or sustain other
damages. In addition, the image quality might be impaired.
Don’t touch the monitor surface with hard objects and only clean it with a soft, dry cloth
and special TFT cleaner.
Don’t use the device for a longer period while the vehicle's engine isn't running. This
could drain the vehicle battery to the degree that the car can no longer be started. In
addition, this might reduce the lifespan of the battery.
Don’t park your vehicle in direct sunlight for extended periods, otherwise the temperature
in the car’s interior could rise to the point that the device overheats and causes
malfunctions. If possible, cool the interior of the vehicle in order to ensure that the device
will operate properly.
Only let the device be installed by qualified vehicle technicians.
Before the final installation of the device into a DIN insertion compartment in the
dashboard, connect the cables and test the connections.
Only use the accessories included in the delivery. Usage of unauthorized components
can cause damages.
If you need to drill holes or make other changes for the installation, consult a specialised
workshop in your area.
This device is designed for a vehicle power supply of 12 V with the ground on the car
body (negative pole). Check the battery voltage before installing it into a camping vehicle,
bus, or truck.
To avoid short circuits, the battery has to be disconnected before the installation.
Read the guidelines in this handbook for the connection of the power supply and other
options.