Sony CFD-E95L - Manual (Page 25)

Setting Up
25 GB
Connecting optional
components (CFD-E95L
only)
You can record a CD on a MiniDisc or enjoy
the sound from a VCR, TV or MiniDisc
player/recorder through the speakers of this
player.
Be sure to turn off the power of each
component before making connections.
For details, refer to the instruction manual of
the component to be connected.
MiniDisc
recorder, DAT
recorder, etc.
to OPTICAL
DIGITAL
OUT (CD)
jack
Recording a CD on a MiniDisc
recorder and DAT recorder
* Select a connecting cable depending on the type
of the digital input jack of the recorder to be
connected. For details, refer to the instruction
manual of the component to be connected. The
OPTICAL DIGITAL OUT (CD) jack of this
unit is square-shaped jack.
The type of the jack Model
of the component number of
to be connected the
connecting
cable
Optical miniplug POC-5AB
(MiniDisc recorder, etc.)
L-type 7-pin connector POC-DA12P
(DAT recorder, etc.)
Square-shaped optical POC-10A
connector (MiniDisc
recorder, DAT recorder, etc.)
1
Open the cover of the MD LINK jacks
of this player and connect the
OPTICAL DIGITAL OUT (CD) jack
with the digital input jack of the
MiniDisc recorder or other component
using the digital connecting cable (not
supplied) .
2
Turn on the power of this player and the
connected component.
3
Make the connected component ready
for recording.
4
Start playing a CD on this player.
Digital
Connecting
cable* POC-
5AB
(not supplied)
Rear panel of
this player
continued
OPTICAL
DIGITAL OUT (CD)
LINE IN
to digital
input jack
LINE