ScyTek Electronics PRECISION 5500 User Manual

Page 10

Advertising
background image

To set the daily start feature:

1. Press and hold Buttons 2 and 3 until the remote beeps four times.

· The fan and clock will be shown indicating daily start mode is entered.

2. Press Button 2 until the desired hour is displayed.

3. Press Button 3 until the desired minute is displayed. The button may be held down to scroll faster.

4. When the desired time is displayed, press Button 5 to store.

· The remote will beep 3 times to indicate the daily start function has been set.

To disable the daily start feature:

1. Press and hold Buttons 2 and 3 until the remote beeps four times.

· The fan and clock will be shown indicating daily start mode is entered.

2. Press Button 1 to disable the daily start function.

· The remote will beep 3 times to indicate the daily start function has been disabled.

Setting The Automatic Cold Start Temperature (2 step procedure, for second step see page 7 under co)

The Automatic Cold Start setting sets the temperature threshold. If automatic start is set to cold temperature setting,the
starter will activate every 2 or 4 hours if the temperature drops bellow the set value.

1. Press and hold Buttons 2 and 3 until the remote beeps five times.

· co will be shown indicating automatic cold start temperature set mode is entered.

2. Press Button 2 to increase the temerature.

3. Press Button 3 to decrease the temperature.

4. When the desired temperature is displayed, press Button 1 to store the value.

· The remote will display the temperature and beep 3 times then 4 times to indicate the set temperature.

Setting The Automatic Hot Start Temperature (2 step procedure, for second step see page 7 under ho )

The Automatic Hot Start setting sets the temperature threshold. If automatic start is set to hot temperature setting, the

starter will activate every 2 or 4 hours if the temperature rises above the set value.

1. Press and hold Buttons 2 and 3 until the remote beeps six times.

· ho will be shown indicating automatic hot start temperature set mode is entered.

2. Press Button 2 to increase the temerature.

3. Press Button 3 to decrease the temperature.

4. When the desired temperature is displayed, press Button 1 to store the value.

· The remote will display the set temperature and beep 3 times then 4 times to indicate the set temperature.

LCD Backlight

Transmitter Button 5 is used for confirmation, transmitter programming, as well as activation of the LCD

backlighting for use in the dark. Press and release button 5 momentarily to activate the LCD backlight.

System Confirmation

The 2-way transmitter's confirmation feature allows the current vehicle status to be displayed at any time.

To display system status:

1. Press and hold Button 5 until the display shows CON.

· The transmitter will beep once.

2. Release Button 5.

· The transmitter will beep once.

· The LCD panel will display the current system status.

Programmable Functions using the LCD Transmitter

Pressing and holding transmitter button 5 will scroll through several transmitter programmable options -
dEG, CHP, snd, PSV, VAL, CO and hO.
dEG Check the temperature inside the vehicle

1. Press and hold Button 5 until the display shows DEG

·The transmitter will beep twice.

2. Release Button 5.

· The transmitter will beep four times.

· The LCD panel will display the temperature inside the vehicle

Page 6 - Precision

Advertising
This manual is related to the following products: