Sony CMT-SX2D - Manual (Page 46)

46 GB
The JPEG image file cannot be played.
• The data CD is not recorded in JPEG format that
conforms to ISO9660 Level 1/Level 2 or Joliet.
• The JPEG image file does not have the extension
“.JPG” or “.JPEG”.
• The data is not formatted in JPEG even though it
has the extension “.JPG” or “.JPEG”.
• Set “Data CD Priority” under “AV” to “JPEG”
(page 23).
• Playback is possible up to 16 levels.
• The album contains more than 999 JPEG image
files.
The sound loses stereo effect when you play a
VIDEO CD or CD.
• Press AUDIO repeatedly during playback to
select “Stereo” (see “Changing the sound”
(page 21)).
• Make sure the system is connected appropriately.
The recording was not done properly when
making a digital recording from the CD/DVD
player of this system to an optional
component connected to the DIGITAL OUT
(OPTICAL) jack.
• Audio data is output from the DIGITAL OUT
(OPTICAL) jack without any sound processing,
so that the audio data is output slightly ahead of
the sound from the speakers. Therefore, start the
optional component recording in advance when
making a digital recording to a connected optional
component (MD deck, etc.).
Picture
There is no picture.
• Press H (or DVD NX on the unit).
• Check that the system is connected securely.
• The video cable is damaged. Replace it with a new
one.
• Make sure you connect the system to the video
input jack of your TV (page 10).
• Make sure you turn on the TV and operate the TV
correctly.
• Make sure you select the video input on the TV so
that you can view the pictures from the system.
• When you play a VIDEO CD, make sure you set
the color system correctly, according to your TV
(color) system (Asian and Oceanian models only).
• Make sure you connect the system and your TV
using the video/SCART cable so that you can
view the pictures.
• For European and Russian models, when
connecting your TV and the T LINE-TV jack of
this system using a SCART cable (not supplied),
make sure that the VIDEO OUT SELECTOR is
set to EURO AV (RGB signals are not output
when the VIDEO OUT SELECTOR is set to
COMPONENT). Also in this case set the system
to interlace format (page 24). When connecting
your TV and the COMPONENT VIDEO OUT
jack of this system using a component cable (not
supplied), make sure the VIDEO OUT
SELECTOR is set to COMPONENT.
• For European and Russian models, turn off the
system when switching the VIDEO OUT
SELECTOR. The setting does not change while
the system is on.
• Except for European and Russian models, when
connecting your TV and the VIDEO OUT jack of
this system using the video cable (supplied), set
the system to interlace format (page 24).
• You have set progressive format but your TV
cannot accept the signal in progressive format. In
this case, return the setting to interlace format
(default setting) (page 24).
• Even if your TV is compatible with progressive
format (525p/625p) signals, the image may be
affected when you set progressive format. In this
case, return the setting to interlace format (default
setting) (page 24).
Picture noise appears.
• Clean the disc.
• When you play a VIDEO CD, the color system is
different. Set the color system to match your TV
(page 23) (Asian and Oceanian models only).
The aspect ratio of the screen cannot be
changed even though you set “TV Type”
under “AV” in the Setup Display when you
play a wide picture.
• The aspect ratio is fixed on your DVD.
• Depending on the TV, you may not change the
aspect ratio.
Messages do not appear on the screen in the
language you want.
• Select the language you want for the on-screen
display in “OSD” under “Language” in the Setup
Display (page 22).
The language for the sound track cannot be
changed.
• Multilingual tracks are not recorded on the DVD
being played.
• The DVD prohibits changing the language for the
sound track.