Sharp UP-820F - Manual (Page 16)

14
(2) Maintenance downloading
To update the preset data for the IRC system, follow the downloading procedure below. The preset
data in the master is downloaded to each satellite without clearing its existing preset data.
1.
Enter the PGM2 mode from the mode selection window.
2.
Select “MAINTE. D/L” and press the
e
key.
The MAINTENANCE D/L window will appear.
3.
Select a preset data item for maintenance and press the
e
key.
Enter an appropriate code range if needed.
The MACHINE No. window will appear.
4.
If you wish to download the preset data to all satellites, select
“ALL” and press the
e
key. If you wish to download the data
to certain satellite(s), select “MACHINE SELECT” and press
the
e
key. In this case, the MACHINE SELECT window will
appear.
Move the cursor to the corresponding machine numbers,
select “YES,” and press the
c
key.