Sharp UX-465L - Manual (Page 49)

Override Ringing
47
3. Ans
w
e
ri
ng
Machi
ne
Programming the override
code
To override the answering machine,
your callers must enter a 3-digit
override code from their telephone.
This code has been set to "009" at
the factory. If you want to change it,
press the panel keys as shown
below.
Important!
♦
Make sure the override code is
different from the remote code
used for remote operations.
1
Press these keys:
Override Ringing
This function allows selected callers using a touch-tone telephone to override the
answering machine's outgoing message and cause the UX-465L to make a special
ringing sound, alerting you that they are calling. This is useful when you are near the
machine but only want to talk with certain callers, taking all other calls on the
answering machine.
2
Enter a 3-digit code number by
pressing the number keys.
4 5 5
(Example)
3
Press the START/MEMORY key
and then the STOP key.
ICM RECORD TIME
FUNCTION 0
Press 5
times
START/MEMORY
STOP
Overriding the answering
machine
Your callers should follow the steps
below to override the answering
machine.
1
Your caller calls the UX-465L from
a touch-tone telephone. When the
outgoing message begins, they
should press the "#" key on their
telephone.
•
The caller will hear a short beep,
and the outgoing message will
stop.